Shurflo 12v engine oil change kit with 11.4 litre bucket 14.1 lpm 0.7 bar (10 psi)

Shurflo 12v engine oil change kit with 11.4 litre bucket 14.1 lpm 0.7 bar (10 psi)

Price: $‎579.99 (Excl. GST)

In stock Sold out - more coming

 
Code: 26.1021
Brand: Shurflo
Country of Origin: Mexico
Weight: 5.2 kg
Shipping rates shown online at the Checkout.
Need assistance? Phone Condor Customer Care
New Zealand 0508 044 055
Australia 1800 260805
International +64 4 568 8544
Condor Pumps
Shurflo 12v engine oil change kit with 11.4 litre bucket 
Model 8050-305-426
14.1 lpm 
0.7 bar (10 psi)
4.7 amp
Dry run capabilities: yes
Pump Body: Polypropylene
Diaphragm: Geolast, oil resistant
Valves: Buna-N
Motor: 12v DC with internal thermal protector
Receiver: plastic with 3 gallon (11.4 litre) capacity
Battery leads: 8 feet (2.4 m) with alligator clips
Suction tube: 8 feet (2.4 m) 1/4 inch OD, oil and heat resistant
Dimensions: 15-1/2 inches (393 mm) high

Operating instructions:
1. Vent bilge area
Run the engine for 5 to 10 minutes to heat up and thin oil
Oil should be 140°F-160° F [60°-71°C]
Turn off engine prior to removing oil
2. Remove dipstick and insert the oil probe tube making certain it is at the bottom of the oil pan
It may help to measure the probe against the dipstick, add an inch and mark the probe
3. Check that pump switch is in OFF position
Connect red (+) clip to battery (+) terminal
Connect black (-) clip to (-) ground terminal
4. Energize the pump by turning switch, located on the motor rear end-bell to the “ON” position
Turn off pump when oil removal is completed
It will be easy to detect through the clear tube
Do not worry about running pump dry, pump has run dry capabilities
5. Remove probe from dipstick tube while wiping with a rag to prevent oil spills
6. To empty the container, pull up the retractable pour spout and pour the oil
7. Please recycle or dispose of used oil and fluid in a responsible manner that is friendly to our environment
Please check the laws of your state and follow all USCG regulations
8. To store, wrap tubing around pump loosely and insert oil probe tube into the small hole in the lid
Explosions hazard:
Motor switch MUST be in “OFF” position when connecting and disconnecting alligator clips to battery terminals and ground
The switch in an “ON” position can cause an electrical spark which can result in explosion
Injury or death can occur

Applications include:
Engine oil
Automatic transmission fluids
Anti-freeze solutions
Low viscosity gear oil

Warning:
Explosion hazard - not suitable for pumping petrol
Applications include:
Engine oil
Automatic transmission fluids
Anti-freeze solutions
Low viscosity gear oil

Warning:
Explosion hazard - not suitable for pumping petrol
The Shurflo story
Shurflo Pumps (USA) started business in 1968.
When the Shurflo company was founded, the recreation market was searching for a dependable fresh water pump to deliver water stored in tanks to the faucets, showers and toilets installed in the coaches. 
Shurflo developed a line of pumps that not only met the need, they worked so well that 25 year old pumps are still working today, hard and efficiently every time a faucet is opened. 
Shurflo has remained responsive to the changing needs of this industry that pumps built today are even quieter, draw fewer amps and are more efficient than those original pumps of the past.
Shurflo has been manufacturing electric motors for its own pumps since 1983. 
Each year over one million motors are manufactured. 
The same dedication to quality that has made Shurflo the leader in its pump markets has been applied to supplying motors to customers who need a dependable, experienced and innovative supplier.
The company routinely deals with agencies around the world and works with TUV and VDE to assure that its products are in compliance with the standards which have earned their CE mark. 
Shurflo has files with UL, CSA, NSF, SK and several others. 
In 1993, Shurflo was the first pump company in North America to earn ISO-9001 registration.