Ketta JEK 3 inch (75 mm) flexible cable pump kit (bare without engine)
Supplied with factory grease packed flexi cable ready-for-work
75 mm (3 inch) hose tail
6 m (20 ft) flexi-cable
Dynapac rapid engine coupler
For 3/4 inch shaft engine
4.8 hp engine min. requirement
Performance:
1250 lpm (330 gpm)
16 m head (23 psi)

Premature inner cable failure:
Cables on these pumps are a wear and tear item – not covered under warranty as ‘faulty’ type parts
The new replacement cable we supply will be no different from the one originally supplied
Precautions to prevent premature inner cable failure include:
1.    Avoid sharp cable bends – ensure cable bend is gradual – avoid kinks in the cable
2.    On start up ensure pump is not submerged in water – this will allow cable to begin turning without the extra torque required to spin pump
3.    Do not take the engine to full revs suddenly – bring the engine revs up slowly
4.    Pump is not designed for heavy muddy water – clean water only
5.    Ensure inner cable remains well greased