Pacer 3 inch BSP(F) poly pump and roll frame
Yanmar L48N 4.7 hp diesel engine
Electric and recoil start
Battery and leads not included
EPDM general purpose seals

Pacer 3 inch 706 S-series poly pump
3 inch BSP(F) ports
Glass-reinforced black polyester
Lightweight 
Corrosion resistant 
5 vane type 706 impeller
Built-in check valve
Self-priming to 7.6 m (25 ft)
870 lpm (230 gpm)
37 m (121 ft) head
3.7 bar (54 psi)

Yanmar diesel engine
Model L48N
Performance:
3.1 kW (4.2 hp) @ 3600 rpm continuous
3.5 kW (4.7 hp) @ 3600 rpm rated
2.8 kW (3.8 hp) @ 3000 rpm continuous
3.1 kW (4.2 hp) @ 3000 rpm rated
Capacities:
2.4 litre fuel tank
0.8 litre crankcase oil capacity
Recommended engine oil:
SAE 10W30 diesel engine oil
Fuel consumption:
0.78 litres per hour @ 3000 rpm (75% load)
Aprox 3 hours run time per 2.4 litre fuel tank
Aprox 57 hours run time per 45 litre fuel tank

The story of Pacer Pumps.
Pacer Pumps began life in USA in 1974.
The founder acted on his idea that a plastic, lightweight, low-cost self-priming centrifugal pump would make a viable alternative to the metal pumps of the day. 
As the idea of a plastic pump took hold, Pacer became the leading name in the industry. 
Pacer Pumps is located in Lancaster, Pennsylvania, USA.
Lancaster is a city located in South Central Pennsylvania which serves as the seat of Pennsylvania's Lancaster County and one of the older inland towns in the United States.
Population in 2012 was 59,360.
Today as part of the ASM Industries family, Pacer has full control over the manufacturing of its products.
Plastic parts are injection molded by a sister company just a few miles from Pacer USA headquarters.
Pacer distribution centers are now also located in Peru, Illinois, Texas, Amarillo and Reno.